Aneeb Roof Shield Coating is an exterior acrylic elastomeric coating that offers waterproofing as well as aesthetics in a single pack. It provides the complete solution to prevent dampness and see pages that spoil the expensive interiors and decorative interior paints. It is highly user friendly and ecofriendly.
Aneeb Roof Shield Coating is elastomeric in nature and has good resistance to weather and sunlight. Aneeb Roof Shield Coating has excellent flexibility, breathing properties, water resistance, crack bridging properties, weathering durability, and excellent resistance to growth of microbial organisms.
Areas of Application
As a weatherproof, protective and decorative coating for exterior masonry, concrete, cement, sand rendered surfaces, all types of exterior walls, etc. Also can be used on all types of dry wall surfaces like gypsum, cement fiber boards, etc.
With concrete repair works as an elastic protective top coating on Repair Guard ready mix polymer mortar
Features & Benefits
- Crack-bridging even at low temperatures (-20°C)
- Water vapor permeable
- Very good resistance against weathering and ageing.
- Suitable tor saline environment due to anti-carbonation properties
- Excellent resistance to microbial organisms like algae and fungi maintaining its aesthetic value Environmentally friendly (solvent tree)
- Reduced tendency to dirt pick up and contamination
Direction for Use
Adequate surface preparation as given below is necessary for product performance.
Aneeb Root Shield Coating Elastomeric Waterproof coating should not be applied to fresh concrete and to other surfaces less than seven days old. Ideally concrete should be allowed to cure for 28 day before application. Power wash to ensure no under bound sand or cement remains on the surface. Allow the surface to dry and apply Aneeb Root Shield Coating.
Power wash to remove all loosely adhered coatings, dirt, mild dew and other contaminants.
Fill any existing cracks up to 3mm with Crack Guard (Acrylic Crack tiller) paintable sealant. And more than 3mm with Repair Guard (Ready to use Polymer Repair Mortar).
Application of Aneeb Roof Shield Coating
Aneeb Root Shield Coating Elastomeric Waterproof Coating can be applied by brush or roller. The material is to be diluted with specitied percentage of water. Dampen the surface slightly with water. Apply first coat at the spread rate of 4.0 - 4.5 m2/ltr. Allow it to dry for minimum 6 hrs.
(Preterably 24 hrs.) before application of second coat. Apply second coat of Aneeb Roof Shield Coating at the spread rate of 4.5 — 5.0 m2/ltr. After thinning it with specified percentage of water.
- Nature: Acrylic co-polymer with special additives
- Thinner: Clean potable water
- Drying time: Dry to touch-30 minutes
- Re coating period: Minimum 6-8 hrs at room temperature (ideally 24 hrs)
- No. of coats: 2
- 100 Per Day
- 7 Days
Khasra No 1250, Village Morta, Near Morta Road, Industrial Area Ghaziabad Uttar Pradesh India +918045478219